17.
Glue Plywood rings with thin CA and put color stickers
on.
18.
Install wheelpants and wheels to the landing gear.
19.
Glue motor mount stick and install motor.
20.
Draw cutting line (4mm above from the bottom) and cut
cowl.
21.
Assemble cowl with screws.
22.
Paint or cover film after shape and glue F39 parts.
23.
Insert and fix struts to the wings with screws.
24.
Assemble wing and fix with screws. Enjoy flying!
Control Throws
The following control throws are recommended starting points. After
you are familiar with this plane, you may increase, or decrease.
Ailerons : 16mm(5/8”) up, 12mm(3/8”) down.
Elevator : 14mm(9/16”) up and down.
Rudder : 19mm(3/4”) right and left.
Page 10