EN
Step 4
Always turn the controller off after flight, and remove all batteries if leaving un-used for a long period of time.
7. AUTO TRIM FUNCTION:
Place the Drone down on a flat surface, press the Resetting Button. The lights on the drone will start to flash. when the
LEDs stop flashing the reset is complete and the drone is ready to fly again.
8. AUTO-HOVER:
1
2
3
4
START YOUR FLIGHT:
Push the Up/Down Lever All the way to the top to unlock the Drone, the motors start working.
AUTO-HOVER:
Press the “Take-off” button (2) once, the drone automatically goes up to air and stays at a height of around 1.5 meters
(Or raise the Left Lever, the drone will taking off). After that push the left stick to keep the drone at any height you
wants. Press the “Landing” button (3) once, the drone will slowly goes down to the floor and finally the motors stop
spinning.
EMERGENCY STOP BUTTON:
In case the drone is to crash against the wall or hit the tree, you can Press the “Speen/Emergency stop” button (4) for
2 seconds, the motors will stop spinning at once and the drone falls to the floor immediately. Make sure there is no
people below the drone.
9. FLIGHT CONTROL:
PLEASE USE THE CONTROLLER TO PRACTICE SIMULATED FLIGHTS BEFORE YOU ACTUALLY TAKE THE DRONE IN
THE AIR FOR THE FIRST TIME
Place the Drone on a flat surface, making sure the Red LED Lights is facing away from you.
When you push Up on the Up/Down Lever the Drone will start to
go Up. When you push Down on the Up/Down Lever the Drone
will start to go Down.
When you push Left on the Turn Left/Turn Right Lever the Drone
will start to spin Left. When you push Right on the Turn Left/Turn
Right Lever the Drone will start to spin Right.
When you press Bank Left Fly Button the Drone will start to Bank
Left. When you press Bank Right Fly Button the Drone will start to
Bank Right.
