EN
GENERAL PACKAGE CONTENTS
1. CONTROLLER COMPONENTS:
GENERAL SAFETY NOTES
• USE ONLY ORIGINAL SPARE PARTS;
Fly only in the safe areas away from the other people and obstacles.
FLY the drone only in the Line of sight, always ensuring the controlled returning back possibility
DO NOT fly during windy conditions, limited visibility
DO NOT fly over crowds, high trees, buildings, electric Power Lines and the other danger areas
The manufacturer is not responsible to any accident, damages, injuries and other direct or indirect losses originating from the error of the Pilot, collision, radio
interference or the other improper use during operation.
For the better first experience satisfaction it is strongly recommended to obtain the assistance of experienced pilot.
The operating temperature range of the product is from +15°C to +30°C.
Please switch off the power of the aircraft and the Remote Control Unit when not in use.
Keep the product in a cool and dry place, away from the liquids and heat sources.
1. 2 x Drone base housing with propeller blades assembled.
7. Plastic box for drone set
2. 2 x 220 mAh LiPolymer battery
8. User manual
3. 2 x USB charger
4. 2 x Remote control Units (batteries are not included)
5. Propeller blades, 8 pcs.
6. Screwdriver and the set of screws
.
Push the controller and the plastics box as the direction of below picture to take out the two controllers.
One key take-off
One key landing
Headless mode
Speed button/Emergency
stop press for 2 seconds
Forward
Right-side fly
Left-side fly
Trim button
Backward
/t
f
e
L
n
r
u
T
d
n
a
n
w
o
D
/
p
U
Turn Right Lever /Fire Button
Resetting Button
Power switch
Flip Button
The player can combine two controller into one controller when two controllers put into the plastics box.
Note:
First you need put two controllers into the plastics box. Second, you need to turn on the two controllers, which one you turn on first, it will be the Up/Down Lever,
and the second one will be the Right side of controller.
3D mode key
One key take-off
One key landing
Headless mode
Forward
Right-side fly
Left-side fly
Trim button
Backward
Speed button/Emergency
stop press for 2 seconds
/t
f
e
L
n
r
u
T
d
n
a
n
w
o
D
/
p
U
Turn Right Lever /Fire Button
Resetting Button
2. SETTING UP THE CONTROLLER / DRONE:
INSTALLING THE CONTROLLER BATTERIES
1. Unscrew the battery cover, and insert 3 *AAA batteries, making sure you insert them following the
correct polarity as shown.
2. Re-attach the battery cover
NOTICE:
1. Always have an adult to install the batteries
2. Always use Alkaline Batteries
3. Never mix old and new batteries
3*1.5V AAA battery
Battery cover
1.5V “AAA”
1.5V “AAA”
1.5V “AAA”
