EST ESTeem Horizon 216An, Руководство пользователя

Страница: 94 / 104

APPENDIX E
TROUBLESHOOTING
Revised: 19 Jan 16 APX E-1 EST P/N AA107-Horizon
TESTING COMMUNICATION LINK
After you have configured at least two of the Horizon wireless Ethernet modems for operation, you can verify
communication with each the following steps:
Status Light
The quickest source of link status is to view the Status
Light on the face of the Horizon (Figure 1). If the Status
light is solid, the Horizon has a connection to another
Horizon listed in the Peer Table.
Status Screen/Peer Table
To view detailed information on the status of the communication link (such as connection speed, signal strength and
last update time) you can open the Status Screen from the Web Interface. After press the Status tab at the top of the
screen the Status: Summary will be displayed showing the status of all ports and memory in the Horizon. Under the
Wireless Status heading click on the View Peer Table (Figure 2). The Peer Table will list all other Wifi (Horizong and
Horizona only) or mobile client wireless activity seen by the Horizon and how it is classified.
Note: The data rate displayed is not necessarily indicative of the RF data rate between the ESTeems. The rate
show in the Repeater Peer table will be the last RF packet, which could consist of either data, repeater
beacon or network probes.
Figure 1: Connection Status Light
Figure 2: Repeater Peer Table
Status LED
Solid Red on Link
Opposite Modem’s Wireless MAC
Receive Signal Strength (dBm)
Last Packet Received
Peer Modem ID
Other Access Points