eSSL eBS-5030A, Руководство пользователя

Страница: 2 / 13

[
键入文字
]
Important Safe guards and Warnings
Safety Precautions

Before using the Machine, operators must be trained with radiation protection
knowledge according to local laws and regulations, and have basic skills in using
the Machine.

Before the Machine is supplied with power, make sure that the power supply voltage
meets requirements and the power source is properly grounded. Do not allow other
large devices to share the same power source.

If the device becomes defective and components need to be replaced,
contact the manufacturer or follow the instructions of a professional.

Contact the manufacturer immediately if components become damaged, such as
external cables, the conveyor belt, lead curtains, and indicators.

Do not leave the Machine unattended when it is powered on.

Do not put any living body parts or living animals into the tunnel when the
Machine is operating.

Do not allow liquids to flow into the Machine while it is working. Turn off the
Machine immediately if any liquids spill on it.

Keep the Machine away from dust and debris if it will not be used for a long period
of time.

Regularly perform maintenance on the Machine. For example, check lead curtains
and clean the conveyor belt and the device’s surface.
X-
ray Protection
The Machine is a micro dosage security inspection device. To ensure the safety of
operators and inspectors:

X-ray is only generated when the Machine is powered on and the control switch is
turned on.

To prevent X-ray leakage, the cabinet and collimator are covered with lead boards,
and the tunnel entry and exit are designed with two-layer lead curtains.

In case of an emergency, operators can press the emergency stop button to stop the
conveyor belt and X-ray source.