eSSL eBS-5030A, Руководство пользователя

Страница: 12 / 13

[
键入文字
]
6. Routine maintenance work
In order to ensure the long-term stable operation of the equipment, the operator should pay
attention to the regular inspection and daily maintenance of the equipment. During the equipment
maintenance process, it can only be carried out after the power is cut off.
The basic contents of daily maintenance work are as follows:
1. The equipment should be installed in a ventilated and dry environment to prevent high
temperature and humidity from affecting the operation of the equipment;
2. When the equipment is running, it is strictly forbidden to put the liquid in the semi-sealed state
on the conveyor belt to avoid the liquid from being spilled.
To the inside of the device, cause a short circuit and burn out the accessories;
3. It is strictly forbidden to place overweight items on the conveyor belt to avoid overload
operation and damage the electric drum;
4. It is strictly forbidden to place ultra-wide or ultra-high items on the conveyor belt to prevent
items from getting stuck in the detection channel;
5. Regularly remove dust and foreign objects on the conveyor belt and lead curtain;
6. In order to extend the service life of the electric drum, the electric drum should be avoided from
idling for a long time;
7. For equipment that has been stored for a long time (more than one month) and is not in
operation, the user should warm up the equipment for 10 minutes after turning on the equipment
before scanning.
8. Avoid sharing the power supply between the equipment and other large equipment, so as not to
affect the normal operation of the equipment;