Essilor Instruments CS POLA 600, Руководство пользователя, Страница: 11 / 62

4. E
NVIRONMENTAL FACTORS
Avoid the following environments for operation or storage.
Where the equipment is exposed to water vapor.
Don't operate an equipment with a wet hand.
Where the equipment is exposed to direct sunlight.
Where the temperature changes extremely.
Normal operating temperature range is from 10°C to 40°C, humidity is from 30% to 75%.
Where it is near the heat equipment.
Where the humidity is extremely high or there is a ventilation problem.
Where the equipment is subject to excessive shocks or vibrations.
Where equipment is exposed to chemical material or explosive gas.
Be careful not to be inserted dust, especially, metal.
Don't disassemble the product or open. We aren't responsible for it for nothing.
Be careful not to close the fan located on the lateral or back side of the equipment.
Don't plug the AC power cord into the outlet before the connection between devices of the
equipment is completed.
This can generate the defect.
Pull out the power cord with holding the plug, not the cord.
To avoid the risk of electric shock, this equipment must only be connected to supply mains
with protective earth.
CSPOLA600 shall be connected to the separate power supply as supplied by ESSILOR with
adapter technology Co., Ltd, type BPM060S12FXX Identified.
Do not position the equipment to make it difficult to operate the disconnection device.
(Appliance coupler or separable plug).
Ahead of going into the discard, ask way to do it or consult with selling agency.
This device incorporates a lithium battery (BAT1) on the main board and a li-ion battery
(BAT2) in the remote control, incorrect replacement of which would result in an unacceptable
RISK. Therefore, replacement by inadequately trained personnel could result in a HAZARD
(such as excessive temperatures, fire or explosion).
CSPOLA600 - Polarized visual chart system > V5 - 03-2018
12
U
SER MANUAL
> II. S
AFETY INFORMATION