Essilor Instruments ALM 500, Руководство пользователя, Страница: 17 / 46

17
4.2.4 4.2.4 4.2.4 4.2.4 Data Output Screen
This screen is to set the communication parameter for outputting the measurement values to the
externally-connected PC etc.
The measurement values and data created on the “ID screen ID screen ID screen ID screen” are output by selecting “RS RS RS RS232C 232C 232C 232C” or
“Both Both Both Both” of “Data Output Data Output Data Output Data Output” on the Setup screen.
Setting of Communication to PC etc Setting of Communication to PC etc Setting of Communication to PC etc Setting of Communication to PC etc....
The communication from RS232C port is set on “Data Output Data Output Data Output Data Output”.
【
Setting screen in case of outputting from RS232C
】
【
Example of connection
】
D-Sub 9pin
(male)
D-Sub 9pin
(female)
Lensmeter Connection PC
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
Use the straight cable (D-sub 9 pin: male/ D-sub 9: female) as the connection cable at the
time of outputting the measurement values by using the RS232C.
※
Contact your local distributor if you have anything unclear or any questions regarding
operation and connection.
Item Description
Setting of output destination
Print
Print Print
Print RS232C
RS232C RS232C
RS232C Both
Both Both
Both
Output Device Output Device Output Device Output Device
Device Device Device Device
printer printer printer printer
RS232C RS232C RS232C RS232C
terminal terminal terminal terminal
Both Both Both Both
Setting
“Off
Off Off
Off” “On
On On
On”
Auto Comm
Auto Comm Auto Comm
Auto Comm
By pressing “Output”
switch on measurement
screen Measurement values
are output
continuously
Band
Band Band
Band Rate
Rate Rate
Rate
(Communication
speed)
Select from 115200
115200 115200
115200, 38400
38400 38400
38400 or 9600
9600 9600
9600.
The output content is same with the one of the printout.
However, the graph at the time of progressive lens measurement is not output.
NOTE NOTE NOTE NOTE
D-Sub
：
9Pin (male)
5 4 3 2 1
9 8 7 6
Use a shield wire for a connecting cable to protect the output data from noise.
NOTE
NOTE NOTE
NOTE
D-Sub
：
9Pin (female)
1 2 3 4 5
6 7 8 9
In case of output from RS232C, the data is output
only in English regardless of language setting.
NOTE NOTE NOTE NOTE