Essentielb RRVP-100, Руководство пользователя

Страница: 14 / 37

using the device
26
V.1.0
troubleshooting guide
27
V.1.0
Stop and reactivate the alarm for the next day:
When the alarm sounds, press the button
FM
to stop the buzzer or radio and
automatically reactivate it the next day. The alarm activation indicator light on the
display stays on.
To cancel the alarm permanently, press the button
. The indicator light to the
left of the time disappears instantly.
You can press the button at any time for a reminder of the
alarm time.
Adjusting the screen brightness
By default, the radio alarm clock is set to an intensive screen display. To decrease
or increase the light intensity, repeatedly press the
Snooze/Dimmer button.
troubleshooting guide
Before contacting your retail store service desk, check the following.
Problem Possible cause Solution
No power The device is not plugged in.
Plug the device into an
appropriate wall socket.
No sound The volume is set to minimum.
Increase the volume by using
the buttons
and
.
Poor FM reception
The station has not been tuned
correctly.
Fine-tune the FM station setting
by pressing and holding the
button
and using the
buttons
and
.
The FM antenna is incorrectly
positioned. Deploy and point the FM
antenna in another direction.
There is interference from other
electrical devices such as
microwave ovens, TVs, etc. Move the radio alarm clock
away from potential sources of
interference.
The alarm doesn’t
work
The alarm is not enabled or is not
set properly. Refer to the paragraph “ Setting
the alarm ”.
The clock is not set.
You must set the clock before
setting the alarm.
Alarm function is
The alarm time has been set but
not activated. The indicator light
is not illuminated to the left of
the time.
Press the button to activate
the alarm and display the
indicator light.
The volume is set to minimum.
Increase the volume by using
the buttons
and
.