13
V.1.0
installing the numerical keypad
Using a USB-A to USB-C adapter
This adapter allows you to connect your accessories
(equipped with USB-A connector) to computers (tablets,
smartphones or others) equipped with USB-C connectivity.
Plug the USB-A cable from the numerical keypad into the
USB-C adapter, then connect the adapter to the USB-C
port.
Using the numerical keypad
1.
Activate the "Num Lock" function by pressing the "Num
Lock" button. The LED will light up white.
NOTE:
the “Num Lock” mode is enabled by default.
2.
When the “Num Lock” mode is on, the keys correspond
to those shown in Figure 1.
3.
When the “Num Lock” mode is NOT enabled, the keys
will correspond to those shown in Figure 2 (on Windows
only).
