use
32
use
33
V.2.0
V.2.0
use
Remote control and control panel description
The buttons on the remote control have the same functions as those on the control panel.
Indicator light
(Bottom)
Switching on the heater / putting it on standby
Selecting the heating power:
- medium: 1300 W
or:
- high: 2000 W
Setting button:
- Press once to set the timer/delayed start (1 to 24 hours)
- Press twice to set the temperature (5°C to 35°C)
ECO
Activate or deactivate the “ECO” mode
Activate or deactivate oscillation
Increase temperature/timer/delayed start
Lower temperature/timer/delayed start
23
ECO
h
(Top)
Switch on the appliance
1.
Plug the appliance into an easily accessible wall socket (a beep sounds if the “I/0”
on/off switch is already in position “I”).
2.
Set the “I/0” on/off switch at the bottom rear to position “I” to put the heater in standby
mode. A beep sounds.
3.
Press the
button to turn on the appliance. The display screen lights up: the heater
operates by default at a temperature of 22°C on medium power
.
Putting the appliance on standby / switching it off
s
tAndby
Mode
Press the
button to put the appliance on standby. A countdown timer appears on
screen (from 10 to 0), then the heater stops. The indicator light
remains on screen
(first with normal intensity, then the intensity diminishes).
s
witching
off
the
AppliAnce
Set the “I/0” on/off switch at the rear to position “0” to switch the heater off. The indicator
light turns
off on screen. When not using the heater, unplug it from the power socket.
Selecting the heating power
Press the
button to select the heating power. The indicator light for the selected
heating power appears on screen:
•
Medium power: 1300 W
or:
•
High power: 2000 W
.
Activate/deactivate oscillation
Press the
button to activate/deactivate oscillation.