Essentials Thermostatic Power Shower, Инструкция по эксплуатации

Страница: 3 / 24

3
Description
The Thermostatic Power Shower is an all-in-one power shower with an
integral mains voltage pump, with separate controls for flow and
temperature. It features a 15mm dual entry push-fit manifold to enable
the appliance to support various inlet supply configurations. The
manifold includes inlet filters and check valves. The thermostatic mixer
incorporates a wax capsule sensing unit and ceramic disc technology
for flow control.
Designed to be surface mounted the Thermostatic Power Shower
comes complete with an adjustable spray handset with three settings,
flexible hose, adjustable slider, sliding rail, soap tray and bracket.
WARNING!
This appliance must be earthed.
In accordance with the current edition of ‘The Plugs and Sockets
etc. (Safety) Regulations in force at the time of installation, this
Essentials Thermostatic Power Shower is intended to be
permanently connected to the fixed electrical wiring of the mains
system.
The shower unit must not be connected to a Mains Cold water
supply, Unvented High Pressure systems or Multi-Point/
Combination Gas Water Heaters.
The function of a thermostatic mixing valve is to deliver water
consistently at a safe temperature. In keeping with every other
mechanism, it cannot be considered as functionally infallible and
as such, cannot totally replace a supervisor’s vigilance where that
is necessary. Provided it is installed, commissioned, operated and
maintained within manufacturers recommendations, the risk of
failure, if not eliminated, is reduced to the minimum achievable.
Introduction