ENGLISH
TO USE YOUR KETTLE
1. Fill the kettle with water: either through the spout or by opening the lid. To open
the lid, simply lift the lock lid. The water level must be between MIN and MAX.
2. Be economical: do not boil more water than needed.
3. To improve the quality of your drinks, always use fresh water.
4. Push the lid firmly close until it locks into position.
Note:
Ensure that the ON/OFF switch is clear of obstructions and the lid is firmly
closed. The kettle will not turn off if the ON/OFF switch is constrained or if the lid is
left open.
5. Plug in the power base and switch the kettle on by pressing the ON/OFF switch to
position I (the indicator light will turn on when the kettle is working).
6.
Your kettle will switch off automatically when it reaches boiling point. To reboil,
simply wait a few seconds and click the ON/OFF switch again.
7. To avoid the risk of splashing, pour slowly and do not overtilt the kettle as this could
cause spillage and scalding
.
8. Empty the kettle after each use.
9. Your kettle is fitted with a scale filter to hold back limescale particles.
BOIL DRY PROTECTION
A safety shut-off device will automatically activate if the kettle is accidentally switched on
without any water, or without sufficient water to cover the element, or by allowing to boil
dry. Should the shut-off device be activated, allow your kettle to cool down for a few
minutes before refilling to allow this device to reset.
CAUTION
1. When using your kettle, please take note that it will get hot when the water is boiled.
Please use the handle to hold the kettle. After the kettle has switched off
automatically (or has been switched off manually), it may need time to cool down.
After 15-20 seconds, the kettle can be switched on again.
2. It the kettle ever boils dry, allow 15 minutes to cool before refilling with cold water.
4
