Essentials C60SHDB10 Скачать руководство пользователя страница 20

Страница: 20 / 24

Screw the keyhole positioned screws into your wall

or kitchen cupboard so that the top surface of the

screw head is approximately 4mm from the surface

you are screwing to.

2. Make a 130mm hole on the top of your cabinet. You will have to use a jigsaw to cut a 130mm diameter hole

in the kitchen cupboard. It is recommended that a qualified person, experienced in fitting cooker hoods, is

consulted before installation.

3. Use the card template supplied to mark the position of the fixing screws.

4. If you are going to rear-mount the cooker hood, the screws and wall plugs supplied should only be used in a

(plastered) brick, breeze block or blockwork wall. They are not suitable for lath and plaster walls or stud and

plasterboard walls. Consult a qualified builder for advice on fixing to these types of walls. If you are top fixing

the cooker hood to a kitchen cupboard, use the screws provided.

5. The keyhole slots are designed so the cooker hood locates over the larger area of the hole and is then pushed

back, or dropped down onto the smaller area of the hole.

Two extra ‘security screws’ are used to ensure the

unit is secure and isn’t accidentally pushed off the

keyhole slots.

6. If you are rear mounting the unit, drill all four holes and fit the wall plugs, but don’t fit the two ‘security

screws’ until the unit is in place.

If you are top mounting the unit; drill a 130mm diametre and four 5mm diametre holes as per the picture

or the card template. Using the 4 × 35mm screws; washers and M4 nuts to fix the cooker hood to a kitchen

cupboard.

7. Check that your fixings are correctly located, by

temporarily fitting the cooker hood. If correct,

remove the protective film (if available).

8. Fit the air outlet adaptor in the hole in the cooker

hood. Some of the black plastic tabs of the adaptor

should be pushed through the hole, while others

remain above. This locks the adaptor in place.

screw

washer

nut

washer

board
unit

air outlet adaptor

Содержание C60SHDB10

























Результаты поиска

Содержание C60SHDB10

Отзывы:

Бренды по названию

Популярные бренды

Essentials C60SHDB10, Инструкция по эксплуатации

Результаты поиска

Содержание C60SHDB10

Отзывы:

Бренды по названию

Популярные бренды