5
Identify the gold buttons on the free end of the
T-Bars (B). Take one of the Adjustable Legs (E),
while pressing in the button slide the Adjustable
Leg (E) over the T-Bar (B) until the gold button
engages. Repeat with remaining Parts (E).
4
Identify the gold buttons on the end of Part (D) and
orient the buttons so they face upwards. Take the End
bar, Part (F), and while pressing in the gold buttons
on Part (D) partially slide one side of Part (F) over Part
(D). Please note that this step may require significant
force. Repeat the process on the other side. Now,
push from the long side of Part (F) until the gold
buttons on Parts (D) engage. Tighten the threaded
connectors on Parts (C).
x 1
Completed parts from this step:
x 2
Completed parts from this step:
6
Now that the Hand Bed Rail is completely
assembled, slide the unit between the mattress and
the box spring at the desired location. Adjust the
height of Part (E) by pressing in the gold buttons on
Part (B) and sliding down. Ensure that both Parts (E)
are touching the ground but not causing the other
parts to lift and that Parts (E) are at the same height.
7
Take the Securing Strap (G) and disengage the
buckle. On the opposite side of the bed from where
the Hand Bed Rail is located, lift the mattress until
Part (F) is visible.
Mattress
Box Spring
Bed Frame
Bed Rail
Mattress
Box Spring
Instructions Continue On Rear
