background image

1

Take one of the Rear Extension Bars (D) and insert the end without the gold button into the threaded connector 
female end of the Front Extension Bar (C), slide to desired length and partially tighten the threaded connector. 
Repeat with remaining parts (C) and (D). These are going to be called “Extension Bar Assemblies” for the 
remaining steps. 

Assembly Instructions

2

Take the Hand Bar (A), while pressing in the gold button, slide the female end of the T-Bar (B) over Part (A). Slide 
to desired length and ensure the gold button is protruding from an adjustment hole. Hand tighten connector. 
Repeat with remaining Parts (A) and (B). 

x 2

x 2

Completed parts from this step:

Completed parts from this step:

x 1

x 2

3

Take one of the extension bar assemblies created in Step 1. While pressing in the gold button on Part (C) of the 
assembly, slide Part (B) over Part (C) until the button engages. Repeat the process with the other side.

Completed parts from this step:

Содержание Endurance P1411

Страница 1: ...l is tight against the mattress and at least 12 from both the head and footboards Periodically check to ensure Home Bed Rail has not moved and is secure ALWAYS use on a standard home bed not for use on toddler bunk water hospital or inflatable beds KEEP these instructions failure to follow these instructions could lead to serious injury or death If any part of the Home Bed Rail is damaged disconti...

Страница 2: ... the Hand Bar A while pressing in the gold button slide the female end of the T Bar B over Part A Slide to desired length and ensure the gold button is protruding from an adjustment hole Hand tighten connector Repeat with remaining Parts A and B x 2 x 2 Completed parts from this step Completed parts from this step x 1 x 2 3 Take one of the extension bar assemblies created in Step 1 While pressing ...

Страница 3: ... Part F until the gold buttons on Parts D engage Tighten the threaded connectors on Parts C x 1 Completed parts from this step x 2 Completed parts from this step 6 Now that the Hand Bed Rail is completely assembled slide the unit between the mattress and the box spring at the desired location Adjust the height of Part E by pressing in the gold buttons on Part B and sliding down Ensure that both Pa...

Страница 4: ... returned to Essential for Warranty inspection using the serial number as identification within thirty 30 days of the date of return authorization DO NOT return products to Essential without Essential s prior written consent Cash on delivery shipments will be refused and shipping charges must be prepaid Limitations and Exclusions The Warranty shall not apply to products if 1 the Essential serial n...

Отзывы: