REPLACE THE BULB (for SP18)
Figure 2
Figure 3
Fixing spring
Figure 1
3 screw
3 screw
The electric fireplaces use one bulb to
make the effect, if the bulb is burnt.
You can replace it.
Turn the POWER switch off, and then UNPLUG
the power cord from the wall outlet.
If fireplace has been operating, Let the unit
cool at least 2 hours.
Unscrew the 6 screw then remove the back
plate (figure 1 and 2)
Pull the bulb fixing spring to loosen the bulb
and rotate the bulb. Then remove the bulb.
Replace the bulb and use the fixing spring to
fixing the bulb.
Screw the back plate and enjoy your fireplace.
NOTE: Light bulb may become loose during shipping. If the flame effect is
dim or does not work, please check that light bulb is finger tight in socket.
See about instructions for replacing bulb.
WARNING: DO NOT EXCEED THE RECOMMENDED
BULB WATTAGE.(1 X 40W Type B-10)
1).
2).
3).
4).
5).
6).
E-7
