performance
Important
ü
û
û
!
When reconnecting the pump and panel take care to
ensure the connectors are water tight. Slightly twist the
connectors when pushing together, ensure the red
sealing ring remains in it’s groove and is not displaced.
û
ü
ü
ü
ü
ü
pump removal (for maintenance)
Remove the top tier and turn upside down on a soft
surface. As you turn ensure the solar panel is supported
so that it does not fall out. Remove the pump from the
connecting tubes and disconnect the cable.
Solar pump and panel assembly.
When re-assembling ensure tubes (1) are connected
and bung (2) is securely fitted in the hole.
1
2
maintenance
To maintain optimum performance regularly
clean the solar panel using water or glass
cleaner in conjunction with a non abrasive
sponge or cloth.
0°C/32°F
û
ü
Frost can cause damage to the pump and fountain. The panel & pump
assembly MUST be removed if the water is likely to freeze. We also
recommend storing your entire fountain in a frost proof environment if
temperatures are likely to remain consistently below freezing.
frost
If the fountain head, nozzle or tubes
become blocked rinse through with water.
1
2
This product is designed primarily to operate in summer months but will also work in
spring and autumn provided there is good sunshine. Performance is directly related to the
amount and strength of sunlight received.
û
û
ü
ü
In bright direct sunlight your pump will work
well with a consistent fountain height.
In slightly cloudy conditions your pump will
work however fountain height will vary as
clouds pass in front of the sun.
In overcast conditions the solar panel does
not generate enough power to run the pump
and it will NOT work.
At night the solar panel does not generate
power and your pump will NOT work.
accessories
The fountain head accessory can be used to enhance your fountain.
It will however only work effectively in bright sunlight when water
flow is high.
The extension nozzle can be used in conjunction with the fountain
head to raise it higher above the water or on it’s own to produce a
finer higher stream of water.
Note
: Take care when using the nozzle in bright sunlight as the high
water stream may cause splashing that will empty your fountain. If
this occurs simply remove the nozzle or add the fountain head.