Using an Extender
10
WeR@Home™ Smart Extender
5.
Using an Extender
The information in this chapter is not required to operate the extender. It is provided to help
understand how the extender works as part of WeR@Home™
Once installed, an extender and its connected devices work automatically as part of your
WeR@Home™.
An extender inherits its hub’s settings, configurations, and associated users.
For example, an extender uses the same time zone and arming delay setting as its hub.
Each change in a hub’s configuration is automatically applied to all the hub's extenders.
All devices connected to an extender display in the app in the same way and place as devices
connected to the hub.
All events reported by devices connected to an extender display in the app in the same way
and place as devices connected to the hub.
A key fob works only with the extender or hub it is paired with.
A detection by a device connected to an extender has the same effect as a detection by a
device connected to the hub.
Each command:
To the hub, is duplicated on the extender.
To the extender, is duplicated on the hub.
Each notification from the hub or the extender goes to your WeR@Home™.
You cannot use an extender as a hub. Neither can you use a hub as an extender.
