Installation Method Alternatives
16
Care@Home™ Door/Window Sensor User Guide
Using Screws
The mounting base has two holes. The thin plastic covering over the holes can be removed, if
necessary. You can drill through the tape, if needed.
Required Equipment
Before beginning, prepare the following equipment:
A drill with a standard appropriate bit
Two 3 X 35 DIN 7982 C screws and wall anchors for the screws. The screws and wall anchors are
not provided.
A standard Philips screwdriver
Installing the MGLS with Screws
To install the MGLS using screws:
1.
Using a screwdriver, clear the two holes in the mounting base for the screws.
Figure 10: Mounting Base with Screws
2.
Place and hold the mounting base on the desired mounting location.
3.
Mark the drilling spots through the screw holes.
4.
Drill the holes.
5.
Insert two wall anchors in the drilled holes, if needed.
6.
Place the mounting base over the wall anchors in the drilled holes.
7.
Screw in the two screws.
