Installation
Care@Home™ Passive Infrared Detector User Guide
11
10.
If the PIR is not from the Care@Home
™
kit, ensure that the pairing process is successful. The
process can have the following results:
If the pairing process is successful, the CP beeps and the ring, around the CP
EMERGENCY
button, blinks
Blue
three times.
If the pairing process is not successful, the CP beeps and the ring lights up
Red
for two
seconds.
If the peripheral device is already paired, the CP beeps and the ring lights up alternating
between
Blue
and
Red
.
If no additional peripheral devices can be integrated, as when the CP memory is full, the CP
beeps and the ring lights up
Red
.
The CP returns to its previous operation mode automatically following the pairing process.
11.
If the PIR
is
from the Care@Home
™
kit and pre-configured with the CP, shake the PIR gently until
the LED lights up
Red,
to establish a communication channel between the PIR and the CP.
The Communication LED on the CP blinks
Green
to confirm that the communication channel is
established.
Figure 8 –
Green
Communication LED on the CP
12.
Close the battery compartment cover.
13.
Insert the PIR into the mounting-base until the PIR clicks into place. Ensure that the lens is pointing
downward, as illustrated in Figure 9 below.
Communication LED
