Esse Plus 500, Инструкция по эксплуатации

Страница: 7 / 36

Page 7
PLUS-500-I03-160617
CONNECTING YOUR COOKER
For your own safety we recommend that a competent person installs
your cooker.
Connecting the Plus-500, Plus-500 HT & Plus-500 IT
The Plus-500, Plus-500 HT & Plus-500 IT cookers are designed to be
installed using a standard 13 Amp plugs. A qualified electrician is not
required.
Electrical connection
Ovens with a three-pole power supply cable are designed to operate
with alternated current at the supply frequency and voltage indicated on
the data plate (located on the inner door panel of the control
compartment).
Connecting the power supply cable to the mains:
The appliance is supplied fitted with a 1.5 metre cable and normalized
13 amp plug which correspond to the load indicated on the data plate.
Before making the connections check that: the circuit breakers or fuses
of the home system can support the appliance load (see data plate); the
power supply system has a sufficient earth connection which complies
with the provisions of current regulations and the law; there is easy
access to the socket. Do not use reducers or adapters as these could
cause heating or burning.
Connecting the Plus-500 IT
The appliance is supplied fitted with two 1.5 metre cables and
normalized 13 amp plugs which correspond to the load indicated on the
data plate. Before making the connections check that: the circuit
breakers or fuses of the home system can support the appliance load
(see data plate); the power supply system has a sufficient earth
connection which complies with the provisions of current regulations
and the law; there is easy access to the socket. Do not use reducers or
adapters as these could cause heating or burning.