Page 11
PLUS1-I03-060120
INSTALLATION
You must be aware of the following safety requirements & regulations:
This appliance shall be installed in accordance with the regulations in force
and in a well-ventilated space.
Read the instructions before installing or using this appliance.
The cooker must be installed in accordance with: All relevant British
Standards / Codes of Practice and the relevant Building / IEE regulations.
Do not use the towel rail as a lifting aid as damage will occur.
Location of the Oven
The appliance should be sited on non-combustible material.
This appliance is designed for domestic cooking only. Use for any other
purpose could invalidate any warranty or liability claim.
Flue Connection
The flue pipe used to connect the appliance to the chimney is 6’’ (150mm)
in diameter.
(The flue connection is on the top of the appliance, in the centre at the back.)
Important Notes
•
The installation must allow access for adequate chimney sweeping
and flue cleaning.
•
Avoid using bends greater than 45º to the vertical. All flue pipe
sections should be as close to the vertical as possible.
•
All joints in the flue system must be effectively sealed.
•
All flue sockets must face upwards. On completing the installation
of the appliance, the chimney, hearth and walls adjacent to the
cooker must conform to local or national regulations currently in
force. In the United Kingdom, the appropriate sections of the
Building Regulations must be conformed to.
•
Air inlet grilles should be positioned so that they are not liable to
blockage.