11
6
Main Fan Oven Control
Main Conventional Oven Control
Grill Control
Lower Conventional Oven Control
Slow Oven Control
Fig. 4
Automatic heat-up function
The automatic heat-up function provides full output power during the initial heating stage, and then
reverts to a pre-selected power level, perhaps for simmering.
To activate the automatic heat-up function, switch on the required cooking zone using the '-' sensor. '9'
will be shown on the display. Now touch the '+' sensor, the display will change to 'A'. Next, use the '-'
sensor to cycle through to the required lower power setting. The display will show 'A' and your chosen
setting alternating during the heat-up period, and then just your chosen setting when the output power
drops to your setting. As an example, setting the automatic heat-up function with a chosen lower setting
of '3' results in the cooking zone working at full power for two minutes, and then reverting to setting 3.
Boost function
Each cooking zone can be boosted to a higher power level for faster cooking. In some cases this is
achieved by limiting power to an adjacent cooking zone.
To set the boost function, ensure that the cooking zone is 'active' i.e. '0' to '9' are shown on the display.
Touch the 'P' (Power) sensor (2), An LED next to the 'P' sensor will flash. Then touch either the '+' or '-'
sensor of the cooking zone to be boosted. The symbol 'P' will appear in the display of any zone in boost
mode.
To turn off the boost function touch '-' and '+' sensors of the appropriate zone simultaneously. Note,
touch the '-' sensor and the zone will revert to setting '9', after which the zone can be controlled in the
normal way using the '-' and '+' sensors.
For safety reasons, the boost function is automatically terminated after 10 minutes.
Keep warm function
Each cooking zone can be used as a keep warm zone.
To set the keep warm function, ensure that the cooking zone is 'active', i.e. '0' to '9' are shown in the
display. Touch the (keep warm) sensor (3). An LED next to the 'keep warm' sensor will flash. then touch
either the '+' or '-' sensor of the cooking zone to be used as the keep warm zone. The symbol 'U' will
appear in the display.
To prevent food from drying out always put a lid on the pan. Remember, the keep warm function can only
work using suitable pans, you cannot, for example, use the system to keep a plated meal warm. The
keep warm function is automatically terminated after two hours.
To switch off the keep warm function touch the '-' sensor of the appropriate zone and the display will
show '0'. Note, touch the '+' sensor and the zone will cycle first to '1' through to '9' depending upon how
long the sensor is touched.
Because of the rapid heating action of the boost function, your hob should never be left
unsupervised while it is in use; not even for a short while.
When using this function, food should only be kept warm for a very short time. The longer
food is kept warm after cooking, the greater the loss of nutrients and risk of bacterial
contamination.