Esse-ti Fly ViewOperator, Руководство пользователя

Страница: 71 / 93

INSTALLATION 71
•
Extension number: 8 (corresponding to extension 48)
¾
Press the button for about 2 seconds.
¾
Wait until the green LED’s start scanning. Press the programming button
when LED L7 turns on.
¾
The red LED’s start scanning. Press the programming button when the
eighth RED LED turns on.
T
ELEPHONE GENERAL PROGRAMMING
Be sure that the phone is in standby mode.
¾
Press “SET” to access the programming mode;
¾
Press “UP” or “DOWN” to scroll through the five programming modes
(from 1 to 5):
1
Date and time “date”
2 Area code “code”
3 line engagement code “pcode”
4 Brightness “lcd”
5 Flash time “flash”
¾
Press “SET” to set the selected programming mode.
The display shows the current setting and the modifiable parameter
starts flashing. Use “UP” or “DOWN” to scroll through the different
options or enter a value with the numerical buttons (enter a value for
each flashing digit). To set more than one parameter, press “SET” to
save the current parameter. The next parameter starts flashing;
¾
Press “DELETE” to exit the programming mode.
Note: When the setting is completed, the next parameter appears on
the display. The programming mode is exited if no key is
pressed within 10 seconds.
Set date and time
¾
Be sure that the phone is in standby mode.