PROGRAMMING
Page 27
ADVANCED PROGRAMMING
TEST OF ALARMS
(INST)
emergency-call button
battery alarm
periodic automatic test call
built-in speaker unit diagnostic alarm
no external power supply alarm
auxiliary alarm
end of alarm
Local programming via
e-stant
software
It is possible to program Helpy Compact via computer by using the USB/serial
proprietary cable and the dedicated
e-stant
software.
e-stant
software also allows to:
- update the firmware of the Helpy Compact
- customize the messages of the Helpy Compact
- set a micro SD card to use for programming, customizing the messages and
updating the firmware of the Helpy Compact.
e-stant
can be downloaded at the following link:
https://www.esse-ti.it/en/download/software-request
Local programming via micro SD card
The micro SD card properly set allows to:
- program the Helpy Compact
- update the firmware of the Helpy Compact
- customize the messages of Helpy Compact.
To use of the micro SD card see the relating instructions.
Remote programming
It is possible to program the Helpy Compact remotely:
- by telephone (via DTMF tones)
- via software compliant with the EPT protocol (via DTMF tones)
