20
Esscom Butler E550 TWIN/TRIPLE
Esscom Butler E550 TWIN/TRIPLE
10.10 Playback of incoming messages and memos
•
Press the
key to play the messages and memos.
•
The messages are played one at a time. If there are new messages, only the new
messages (those that have not been heard) are played.
•
During playback, you can:
–
go to the beginning of the current message by pressing the key once.
–
go to the previous message by pressing the key twice.
–
stop playback by pressing the Stop
key.
–
interrupt playback by pressing the pause key
. Press the play key
again to
resume playback.
–
go to the next message by pressing the key.
10.11 Erasing messages
10.11.1 Erasing messages one at a time during playback
Start message playback as explained above.
•
When the message to be erased starts playing, press the delete
key for 2 sec.
•
The display will show ‘
dL
’ and the message will be erased.
10.11.2 Erase all messages
One can also erase all heard messages at one time. This erases only the messages that
have already been heard. New messages are not erased.
•
Press the delete key for 2 sec.
•
The display will show ‘
dL
’.
•
Press the delete key again to confirm.
10.12 Memory full
If the memory is full, ‘
FL
’ will be shown on the display. If the answering machine is turned on
and a call comes in, the machine will automatically play OGM 2 (answering machine function
without recorded caller message).
•
Erase all the messages after listening to them.
•
The memory is free again.
10.13 Remote operation
The answering machine can only be operated remotely using a tough-tone phone (DTMF
tone selection system).
•
Call your machine.
•
The answering machine picks up the line, you hear the outgoing message and a beep.
•
After the beep, slowly dial the VIP code (default 321).
•
You will hear two short beeps for confirmation.
•
Enter the next codes to use the desired function:
a) Listening to messages
•
Press ‘2’ (listen to messages). The answer machine will play the messages.
During playback, you have the following options:
•
Press ‘2’ to pause playback for 30 sec.
•
Press ‘2’ to restart playback.
•
Press ‘3’ to go to the next message.
•
Press ‘1 1' to go to the previous message.