8
ESS SC-EB OWNER’S MANUAL
Quick List: To clean the SC-EB after operation:
1. Clean the exterior of the sprayer with a damp cloth.
2. Clean the Nalgene bottles and Hose/Cap Assembly with
clean water. Triple rinse.
3. Disconnect the red Air Hose from the Spray gun Air Line
and Sprayer Air connection.
4. Disassemble and clean the liquid filter. Be careful not to
lose the flow disk.
5. Unthread the quick connect plug from the spray gun liquid
line leader. Use a 7/16” wrench on the plug and an 11/16”
wrench on the 1/8” NPT body.
6. Connect the quick connect plug to the air hose of the
twin line hose.
7. Fill one bottle with a liter of clean water.
8. Turn on the air compressor to flush the line with
most of the of water. Turn off the air compressor.
9. Disconnect the quick connect plug from the air hose,
then connect it into the spray gun liquid line leader.
10. Reassemble the liquid filter.
11. Turn on the air compressor and engage the trigger to flush
the spray gun lines with the remaining water. Check the
nozzle for a good spray pattern while flushing. Allow air to
flow for 30 seconds after the water has been sprayed.
12. Apply silicone spray or similar lubricating oil to all quick
connect fittings.
Detailed instructions on maintaining each of the SC-EB’s components
follow in the next sections.
This is an excellent silicone-based pro-
tective lubricant. You may purchase it
directly from ESS.
P/N 3174
Содержание SC-EB
