Espressif Systems ESP8266 AT Скачать руководство пользователя страница 61

Страница: 61 / 64

5. TCP/IP-Related AT Commands

5.2.25. AT+CIPDNS_DEF—Sets User-defined DNS Servers; Configuration Saved in the Flash

Response

[

+CIPDNS_CUR:<DNS server0>]

[

+CIPDNS_CUR:<DNS server1>]

Parameters

•

<enable>:

‣

: disable to use user-defined DNS servers;

‣

: enable to use user-defined DNS servers.

•

: optional parameter indicating the first DNS server;

•

: optional parameter indicating the second DNS serve.

Example

AT+CIPDNS_CUR=1,"208.67.220.220"

Note

•

For command:

AT+CIPDNS_CUR=0

(disable to use user-defined DNS servers), "

208.67.222.222

" will be

used as DNS server by default. And the DNS server may change according to the configuration of the
router which the chip connected to.

•

For command:

AT+CIPDNS_CUR=1

(enable to use user-defined DNS servers, but the <DNS server>

parameters are not set), servers

"208.67.222.222"

will be used as DNS server by default.

Commands

Query Command:

AT+CIPDNS_DEF?

Function: Get the user-defined DNS
servers which saved in flash.

Set Command:

AT+CIPDNS_DEF=<enable>[,<DNS server0>,<DNS server1>]

Function: Set user-defined DNS servers.

Response

[

+CIPDNS_DEF:<DNS server0>]

[

+CIPDNS_DEF:<DNS server1>]

Parameters

•

<enable>:

‣

: disable to use a user-defined DNS server;

‣

: enable to use a user-defined DNS server.

•

: optional parameter indicating the first DNS server;

•

: optional parameter indicating the second DNS serve.

Example

AT+CIPDNS_DEF=1,"208.67.220.220"

Note

•

This configuration will be saved in the user parameter area of flash.

•

For command:

AT+CIPDNS_DEF=0

(disable to use user-defined DNS servers), "

208.67.222.222

" will be

used as DNS server by default. And the DNS server may change according to the configuration of the
router which the chip connected to.

•

For command:

AT+CIPDNS_DEF=1

(enable to use user-defined DNS servers, but the <DNS server>

parameters are not set), servers

"208.67.222.222"

will be used as DNS server by default.

Espressif

55 58

2017.05

Содержание ESP8266 AT
































































Результаты поиска

Содержание ESP8266 AT

Отзывы:

Espressif Systems ESP8266 AT, Набор инструкций, Страница: 61 / 64

Результаты поиска

Содержание ESP8266 AT

Отзывы: