Espressif Systems ESP8266 AT Скачать руководство пользователя страница 42

Страница: 42 / 64

4. Wi-Fi AT Commands

4.2.28. AT+CIPSTA_DEF—Sets the IP Address of the ESP8266 Station; Configuration Saved in the

Flash

4.2.29. AT+CIPAP—Sets the IP Address of the ESP8266 SoftAP

[@deprecated] This command is deprecated. Please use

AT+CIPAP_CUR

AT+CIPAP_DEF

instead.

Commands

Query Command:

AT+CIPSTA_DEF?

Function: to obtain the IP address of the ESP8266
Station.

Set Command:

AT+CIPSTA_DEF=<ip>[,<gateway>,<netmask>]

Function: to set the IP address of the ESP8266
Station.

Response

+CIPSTA_DEF:<ip>

Parameters

⚠

Notice:

Only when the ESP8266 Station is connected to an
AP can its IP address be queried.

•

<ip>

: string parameter, the IP address of the

ESP8266 Station.

•

[<gateway>]

: gateway.

•

[<netmask>]

: netmask.

Notes

•

The configuration changes will be saved in the user parameter area in the flash.

•

The Set Command interacts with DHCP-related AT commands (

AT+CWDHCP

-related

commands):

‣

If static IP is enabled, DHCP will be disabled;

‣

If DHCP is enabled, static IP will be disabled;

‣

Whether it is DHCP or static IP that is enabled depends on the last configuration.

Example

AT+CIPSTA_DEF="192.168.6.100","192.168.6.1","255.255.255.0"

Commands

Query Command:

AT+CIPAP?

Function: to obtain the IP address of the ESP8266
SoftAP.

Set Command:

AT+CIPAP=<ip>[,<gateway>,<netmask>]

Function: to set the IP address of the ESP8266
SoftAP.

Response

+CIPAP:<ip>,<gateway>,<netmask>

Parameters

•

<ip>

: string parameter, the IP address of the ESP8266 SoftAP.

•

[<gateway>]

: gateway.

•

[<netmask>]

: netmask.

Notes

•

The configuration changes will be saved in the user parameter area in the flash.

•

Currently, ESP8266 only supports class C IP addresses.

•

The Set Command interacts with DHCP-related AT commands (

AT+CWDHCP

-related

commands):

‣

If static IP is enabled, DHCP will be disabled;

‣

If DHCP is enabled, static IP will be disabled;

‣

Whether it is DHCP or static IP that is enabled depends on the last configuration.

Example

AT+CIPAP="192.168.5.1","192.168.5.1","255.255.255.0"

Espressif

/52

2017.05

Содержание ESP8266 AT
































































Результаты поиска

Содержание ESP8266 AT

Отзывы:

Espressif Systems ESP8266 AT, Набор инструкций, Страница: 42 / 64

Результаты поиска

Содержание ESP8266 AT

Отзывы: