Espina XTP9, Инструкция по эксплуатации

Страница: 50 / 58

•
Latch the handlebar in place with the lock pin during lifting/transporting.
•
Secure or tie down unit using lift hook or roll cage when transporting.
Machine may fall and cause damage or injury if lifted incorrectly. Lift by lift hook only.
MAINTENANCE
Maintaining your compactor will insure long life to the machine and its components.
Preventive Maintenance
1. Turn off the engine. Engine must be cool before starting the maintenance.
2. Keep the engine’s throttle lever in its SLOW position, and remove spark plug wire from spark plug and
secure.
3. Inspect the general condition of the plate compactor. Check for loose screws, misalignment or binding
of moving parts, cracked or broken parts, and any other condition that may affect its safe operation.
4. Remove all debris from the plate compactor with a soft brush, vacuum, or compressed air. Then use a
premium quality lightweight machine oil to lubricate all moving parts.
5. Clean the bottom of the compactor base as soon as it begins to pick up soil being compacted. The unit
cannot do a good job if the bottom surface is not smooth and clean.
6. Replace spark plug wire.
Never use a “pressure washer” to clean your plate compactor. Water can penetrate tight
areas of the unit and cause damage to spindles, pulleys, bearings, or the engine. The use of
pressure washers will result in shortened life and reduce serviceability.