ESPEC PLATINOUS CHAMBER Series, Руководство по настройкам

Страница: 17 / 93

Platinous Options Manual
Chamber Cabinet
2.5 Dry Air Purge (ES-DA5,10)
2.5.1 Purpose
The dry air purge is used to reduce the potential for condensation on products during heat-ups or to extend
the time between defrost cycles for continuous low temperature operation.
2.5.2 Installation
Connect air supply per the following:
2.5.3 Operation
The dry air is being purged into the workspace when Time Signal No. 9 (Dry Air) is set ‘ON’.
2.5.4 Maintenance and Troubleshooting
Checking Dry Air Desiccant (every month)
Remove the water compartment box door and set the chamber to low humidity operation. Wait
approximately 10 minutes, then check the moisture indicator in the air compartment. The normal color of
TABLE 2.1. ADDITIONAL UTILITIES REQUIRED
Air Inlet Connection 1/2” FPT Fitting
Air Volume
8 CFM at 80-120 PSIG (ES-DA5)
16 CFM at 80-120 PSIG (ES-DA10)
Com pres sed Air Inlet
Water Com partm ent
Dry Air Package
(located inside)