Manuale_IPL10_ENG_R0.doc
8
4.3 FUNCTIONING WITH TIMER (OPTIONAL VERSION)
1 2 3
Timer 1 secondo
Timer 0,01 secondo
1 2 3 4
4.3.1 VERSION WITH 1” TIMER
. Press the key 1. “PROG” on the front to activate the programming of the ignition time
. Scan with the key PROG the functionality hours/minutes/seconds. Use the keys 2. “+” /
3. “-“ to modify the set value. Press again the key PROG to save the set value.
4.3.2 VERSION WITH 0.01” TIMER
. Press the key 1 to activate the programming of the ignition time
. Scan with the key 1 the functionality hours/minutes/seconds/tenths/centimes. The value
to be set will blink, use the keys 2 and 3 to increase or decrease the set value – press the
key 1 to move on the following value to be modified, until the end of the values.
How to activate the pump
- select on the front from the key no. 1 the position I or II
- on the position I the timer will be activated by the pulse of the pedal
- press the pedal ONCE or press the key 3. “START” on the control panel
The pump will work for the selected uptime and will stop at its expiry, releasing a beep.
The pump is now waiting for a new input to run again.
In order to “PAUSE” the pump DURING operation press again the pedal or the key
“START”.
Press again the pedal of the key “START” in order to restart the pump. The pump will work
for the remaining time indicated on the viewer.
It is possible to use the pump with timer also manually in two different modalities:
1)
Continuous ignition: use the button no. 2 on the front, position ON. The pump will
run in continuous.
2)
Power pulse: set the key no. 2 on the position OFF and the key no. 1 on the position
II; the pump will start with the pedal pressure and will stop at its release.