21
English
Adding tracks to the end of the program
When stopped or during playback, use the number buttons to select
the track you want to add.
Clearing the entire program and resuming
ordinary playback
When stopped or during playback, press the REPEAT button for at
least two seconds to end program mode. Press the REPEAT button
during program playback for at least two seconds to resume ordinary
playback from that point.
o
When ordinary playback is resumed, the contents of the program
will be cleared.
In addition, when stopped or during playback, if you press the tray
open/close (
-
) or main unit POWER button, the program contents
will also be cleared.
This unit can be used as a D/A converter when its input source is set
to an external digital input (COAX in, OPT in or USB in).
Changing the input source
When stopped, press the MODE button repeatedly to cycle through
the following input sources.
CD/SACD
COAX in
(coaxial digital input)
USB in
OPT in
(USB input
for computer)
(optical digital input)
o
When an external digital input (COAX in, OPT in, USB in) is selected,
the name and sampling frequency of the selected input appear on
the display. If there is no input signal or the unit is not locked to the
input signal, the input sampling frequency is not shown and the
input name blinks.
o
If the input signal is not a digital audio signal or uses an audio signal
format that is not supported by this unit (such as Dolby Digital, DTS
or AAC) “- - -” appears in place of the sampling frequency. Set the
digital output of the connected equipment to PCM audio output.
o
When an external input (COAX in, OPT in, USB in) is selected, disc
controls other than the tray open/close (
-
) button do not function.
D/A converter mode
