esky C5900, Руководство пользователя

Страница: 17 / 66

IP Camera (C5900) User Manual
Enter the default User name (admin) and leave the password blank then press “OK” to access
the main screen of the camera’s Web Configuration.
The defaul
t username is ‘admin” and the camera initially will not ask for any password. The
administrator should immediately implement a new password as a matter of prudent security practice.
Once the administ
rator’s password is saved, the camera will ask for the user’s name and password
before each access. The administrator can set up a maximum of 8 user accounts. Each user can
access the camera at the same time. Some critical functions are exclusive for the administrator,
such as system configuration, user administration and software upgrades. The user name for the
administrator is permanently assigned as
“root”. Once the password is changed, the browser will
display an authentication window to ask for the new password. Once the password is set, there is no
provisi
on to recover the administrator’s password. The only option is to restore to the original factory
default settings by pressing the reset hole for 10 seconds.
Note: The username and password demonstrated in all the illustrative pictures below is shown as
default.
3.2 Installing plug-in
When you access to the camera at the first time, you will be asked to install a new plug-in for the
camera. Permission request depends on the Internet security settings of your computer. If the highest
security level is set, the computer may prohibit any installation and execution attempt. When the
plug-in has been registered for certificate and is used to display the video in the browser. Users may
click on “Yes” to proceed. If the web browser does not allow the user to continue to install, check the
Internet security option and lower the security levels or contact your IT or networking supervisor for
help.