Eskimo WIDE 1 XR, Руководство оператора

Страница: 13 / 32

13 Check for parts online at
www.GetEskimo.com
or call
800-345-6007
Operator’s Manual
ESKIMO
®
WIDE 1
™
XR Thermal
ENGLISH ENGLISH
SLED
EDGE TRIM
#6 - 1/2”
SCREW
SKIN
F I G U R E 1 4
F I G U R E 1 3
Pull the skin taut and push the
edge trim over lip of the sled
with the shelter skin between
the two. It is important to keep
the skin taut and work the edge
trim evenly around both sides of
the shelter until all edge trim is
in place.
NOTE: When pulling the shelter skin
tight, DO NOT lift the lower frame
support off the ground. Using a
rubber mallet may be helpful while
attaching the edge trim to the sled lip.
STEP 16
S E E F I G U R E 1 3
Secure the edge trim in
place using sixteen #6 x 1/2
inch sheet metal screws
[#36952]
provided. A cordless
drill and Phillips head bit is
recommended for this step, but
is not necessary.
NOTE: Screws should be spaced
evenly apart. This step does mean
you will put very small holes in your
shelter skin to keep the edge trim
and skin securely attached to the
sled lip. This will in no way affect the
performance of your shelter.
STEP 17
S E E F I G U R E 1 4
SKIN
EDGE TRIM
SLED