11
Check for parts online at
www.GetEskimo.com
or call
800-345-6007
Operator’s Manual
ESKIMO
®
WIDE 1
™
XR Thermal
ENGLISH
ENGLISH
F I G U R E 1 0
F I G U R E 1 1
Attach bent aluminum upright
assemblies
[Q/R/S]
to each
hinge
[A]
using two 1/4-20 x
2-1/2 inch Phillips drive bolts
[#67430]
, two ¼ inch washers
[#48261B]
, and two 1/4 inch
nuts
[#67538B]
.
NOTE: Ensure again that the arrow
on the pivot pole cap [R] on each
assembly is pointing outward.
STEP 10
S E E F I G U R E 1 0
The shelter skin
[#40742]
is
required to be attached to
the bottom extending tube
assembly
[T]
prior to assembling
to the bent aluminum uprights
[Q/R/S]
from Step 10.
Locate the five split rings at the
front bottom of the shelter,
then thread the bottom
extending tube assembly
through them in sequence.
NOTE: The outer shell of the skin (Red
and Black fabric) should be face down
with the interior (gray fabric) towards
yourself when doing this.
STEP 11
S E E F I G U R E 1 1
NOTE
A
T
Q/R/S
Q/R/S
#67430
#48261B
#67538B
#40742