Eskimo M43Q10, Руководство оператора

Страница: 12 / 20

Page 12
SERVICE INFORMATION
At Ardisam, we build quality and durability into the design of
our products; but no amount of careful design by us, and
careful maintenance by you, can guarantee a repair-free life
for your auger. Most repairs will be minor, and easily fixed by
following the suggestions in the troubleshooting guide in this
section.
The guide will help you pinpoint the causes of common
problems and identify remedies.
For more complicated repairs, you may want to rely on your
retailer, an authorized mechanic or Ardisam, Inc. (contact
your retailer for a list of authorized mechanics in your area).
A parts catalog is included in this section.
We will always be glad to answer any questions you have, or
help you find suitable assistance. To order parts or inquire
about warranty, call or write us at the address found in the
next column under the section ordering repair parts or check
out our website - www.ardisam.com
SERVICE, TROUBLESHOOTING AND REPAIR
ICE POINT REPLACEMENT
1. Remove blade protector and both blades.
2. Remove nut and retaining bolt from point.
3. Using a locking pliers, grasp point and pull out. If holder
doesn’t come out with the point, remove with pliers.
4. With locking pliers, push in new point and holder aligning
bolt hole in point with holes in auger shaft.
DO NOT
DAMAGE END OF POINT.
NOTE: When installing holder in auger shaft, edges of
holder may shave off.
5. Insert retaining bolt and tighten with nut.
6. Re-attach both blades and put blade protector back on.
IN CASE OF A SERVICE PROBLEM, DO NOT SEND
UNIT BACK TO RETAILER. CONTACT ARDISAM, INC.
AT 1-800-345-6007.
Avoid injury! Auger blades and point are extremely
sharp. Use caution when removing & replacing.
CAUTION