8
C
r0
Cr1 (Default)
is a fixed span (no cycling), with a variance of +/- 0.3⁰C (+/- 0.6⁰F). The heating unit
will operate at full power and the power bar will appear full. This function is for users
who do not want their electric heating devices turning on and off frequently. This is the
recommended setting for fan assisted electric heating devices.
is a 20 second cycle rate with proportional heating. This means the heating
will be turned on and off once every 20 seconds to provide a stable room temperature.
The cycle rate allows a proportional level of power to the heating device. This is indicated
on the thermostat display by the power bar which will be partially filled; indicating the
amount of power going on the heater. This setting is recommended for non-fan assisted
baseboards and electric heating devices
Cr2
is a 240 second cycle. This means the heating will be turned on and off once every 240
seconds. This is the recommended setting for fan assisted heaters, radiant ceilings and
convectors.
and will provide the most energy efficient heating
and a stable temperature.
Option 2: Selecting the Heat Cycle Rate . . . continued
While it is still in the Options Setting mode, press SET again to advance to the second
option (
will flash on screen).
Press
or
to select the cycle rate
Cr:1
?
Operating Manual
