Setting Time and Day
?
Press SET to enter the clock setting mode. (SET appears and the clock symbol/
time flashes).
Press
or
to scroll to the correct time of day. (
Hold the button to
accelerate).
Press DAY repeatedly to change the day of the week. (Weekday symbols to flash).
Press SET to end the time mode; or wait 15 seconds to return to normal display.
Tip:
10
Operating Manual
Celsius (⁰C) is the default temperature unit; no action is required if this is the desired
temperature display.
IMPORTANT:
If you wish to use Fahrenheit (⁰F), it is important to choose this
temperature unit before you begin programming the thermostat. If you proceed to
set programs using the default mode in Celsius (⁰C), then change to Fahrenheit (⁰F)
or vice versa, all programs set by the user will be deleted and will reset to factory
defaults.
Press SET again to advance to the final option. The current temperature will
appear on screen.
Press
or
to toggle between the ⁰C or ⁰F
?
Option 4: Selecting the Temperature Unit (⁰C or ⁰F)
