ESI WaMi Box, Руководство пользователя, Страница: 26 / 35

2 2
3. Click the INPUT SELECTOR on WaMi Box front panel repeatedly to select
the input source (coaxial, optical, line in or microphone).
4. The input source selection you make is routed to INPUT channel on the
WaMi Mixer.
5.
In your audio recording software, select a track and designate the input
source
WaMi Box Synth Record. Depending on the software you use.
T O P L A Y B A C K A U D I O
1. Open your digital audio recording software/sequencer.
2. Open WaMi Box Mixer by clicking once on its icon in the Windows Status
Bar.
3. In your audio recording software, select the output port among WaMi Box
Synth Play#1 to whatever number of virtual output channel corresponds to
the WAVE channel on WaMiBox Mixer.
4. To apply reverb and/or chorus to the sound, click on the FX Panel and
adjust the send level in Wave section. Then open Virt. Channel window
and adjust
REVERB or CHORUS return slider until desired effect is
achieved.
5. To apply pan-pot to the sound, click on the PAN slider under WAVE level
fader and drag it to the left or right.
l
Since most audio recording software has volume controls, you can leave
the WaMiBox Mixer fader to its highest position.
A
A
d
d
v
v
a
a
n
n
c
c
e
e
d
d
S
S
e
e
t
t
U
U
p
p
In this set up, WaMiBox functions as the centerpiece of your digital audio and MIDI
workstation. The basic procedures for handling MIDI and digital audio is same as in
the Basic Set Up. However, in a more complicated set up, you may want to connect:
1. Coaxial S/PDIF output from a CD player to S/PDIF input of WaMi Box, and
S/PDIF output from WaMi Box to S/PDIF input of CD recorder or DAT.
2. Optical S/PDIF output from a digital mixer to optical S/PDIF input of WaMi
Box