ESI WaMi Box, Руководство пользователя, Страница: 25 / 35

2 1
Select the FX button on the basic Mixer window. In this mode, you will have reverb
and chorus effects send on all sources, as well as the program graphic equalizer.
T O R E C O R D A N D P L A Y B A C K M I D I
1. Open your MIDI sequencing software.
2. Open WaMiBox Mixer by clicking once on its icon in the Windows Status
Bar.
3. Select a track to record MIDI in your MIDI sequencing software.
4. Select input source on your MIDI sequencing software as MIDI (as opposed
to wave or audio).
5. Select WaMi Box MIDI Play as your MIDI output and select a MIDI
channel.
l
If you want to use external MIDI sound module connected to
WaMiBox, select
WaMi Box MIDI-1 as your MIDI output.
6. Select a MIDI instrument (sound font) of your choice using Set Manager.
7. On WaMiBox Mixer, make sure that the MIDI channel fader is up. MIDI
channel is located just to the left of Wave module. This fader controls the
output volume of MIDI sound fonts in WaMi Box.
8. To apply reverb and/or chorus to WaMiBox sound font, click on the FX
Panel button on the Mixer window and adjust the send value of
Reverb/Chorus knob in MIDI section
9. To apply pan-pot to WaMiBox sound font, click on the PAN slider under
the level fader and drag it to the left or right.
l
Since WaMiBox sound fonts are all in stereo, it’s best to leave the pan-
pot in the center position unless you need to change the stereo image of
all MIDI sounds in WaMiBox.
10. Follow your MIDI software’s instructions on recording and playback
WaMiBox MIDI sounds are sent to all outputs (analog and digital), as well as
the headphone. Using the Output Select slider, you can also assign desired
output port for MIDI signal.
T O R E C O R D A U D I O
1. Open your digital audio recording software/sequencer.
2. Open WaMi Box Mixer by clicking once on its icon in the Windows Status
Bar.