ESI QuataFire
610
11. Specifications
Analog Inputs Specifications
- Type : 24bit / 96kHz, 4 channel analog inputs
2 balanced XLR/TRS universal combo connector (channel 1/2)
2 unbalanced RCA jacks (channel 3/4)
- Level: -10.0dBv Nominal (-17.5dBFS / Gain +0dB)
+ 7.5dBv Max ( 0 dBFS / Gain +0dB)
- Gain Adjustment : +0dB ~ +40dB
- Input Impedance : XLR/TRS : 10k Ohm (Balanced), 8.2k Ohm (Unbalanced)
RCA Jack : 10K Ohm
MIC Mode : 1.5K Ohm
HI-Z Mode : 140K Ohm
- Dynamic Range : 100dB (@ -60dBFS with A-weighted)
- THD : 0.001% (@ -3dBFS, A-Weighted)
- Pass band Ripple : 20Hz ~ 20.0KHz, +/- 0.01dB (@ fs=44.1KHz)
- Channel Cross talk : <-100 dB, 1 kHz signal @ -3dBFS
- 48V Phantom power on XLR inputs
Analog Outputs Specifications
- Type : 24bit / 192kHz, 8 Channel analog outputs
4 unbalanced RCA jack (CH1/2/3/4)
2 unbalanced stereo 1/4" TRS phone jack (CH5/6/7/8)
- Level : -10.0dBv Nominal (-17.5dBFS / Gain +0dB)
+ 7.5dBv Max ( 0 dBFS / Gain +0dB)
- output impedance : 150 ohm
- dynamic range : 112dB (@ -60dBFS, A-weighted)
- THD : 0.0008% (@ -3dBFS, A-weighted)
- pass band ripple : 20Hz ~ 20.0KHz, +/- 0.2dB (@ fs=44.1KHz)
- channel crosstalk : <-111 dB, 1 kHz signal @ -3dBFS
Headphone Amplifier Specifications
- output power : 100mW Max @ 32ohm
- output impedance : 32 ~ 600 ohm (internal 16 ohm)
- dynamic range : 105dB
- THD : 0.005 (typical)
Digital I/O Specifications
- Type : SPDI/F coaxial I/O connector
- Format : IEC-958 Consumer(S/PDIF), IEC-958 Professional(AES/EBU)
- Sample Rate : 44.1 - 96kHz
- Resolution : 24 Bits
Power Specifications
- Power consumption : 7W (typical)
- IEEE1394 Bus Power : DC 8V ~ 30V
- External Adaptor : DC 8V ~ 30V, higher than IEEE1394 bus power
(recommend : 24V, 500mA)
Dimension
- 144 (W) x 100 (D) x 44 (H) mm
27
