Page 2
Kata2-MS
Components and tools
Please review these instructions before beginning the installation. Use the illustrations below to check that all the components needed for your
installation were provided with your order. Do not discard the packaging until the product works to your satisfaction.
Components and tools
Additional tools required
• Phillips screwdriver
Caution
• Hand tighten screws only. Do not use power tools.
for clamp mounting method:
monitor arm assemblies (2) and
clamp base assembly (1)
for both mounting methods:
grommet base assembly (1)
grommet base cover (1)
for optional
grommet mounting method:
monitor arm assemblies (2), plus...
grommet bar (1)
M4x10
grommet knob (1)
VESA plate screws (8)
cable clips (2)
clamp base assembly
not included when
optional grommet
mounting is ordered
M4x6 set screws (2)
M4x9 set screws (4)
M4x15
VESA locking screws (2)
VESA mount assemblies (2)
dual Allen key (1)
2mm and 4mm
