ESI ESCTP-RF, Инструкция пользователя

Страница: 8 / 16

8
2. Operation modes
1.1
Display and button functions
By default, the thermostat will start in MANUAL mode.
Use the dial to select the set temperature. (Default 50.0°C)
The cylinder thermostat will permanently aim to maintain the
cylinder at the set temperature
N.B: When in standalone configuration (not paired to any other
wireless device), the display will show Z1.
2.2
OFF
To turn
OFF
the cylinder thermostat,
press
and
hold
the
Mode
button for 5 seconds. When
OFF
mode has been selected, the
display will also turn off.
To turn the cylinder thermostat back
ON , press and hold the
Mode button for 5 seconds. When turned back on, the display
will also turn on.
2.3
AUTO
If the thermostat is paired with a compatible Wi-Fi room
thermostat (i.e. ESRTP6WHW, ESRTP6CW, etc.) The AUTO
mode will be available both through the “heating and hot water
schedule” on the room thermostat, or through the ESi Controls
Centro app.
Once the schedule has been set, the cylinder thermostat will ask
for heat at the set ON times, and it will use the set temperature
previously selected.
N.B:
When in Auto mode, the display will show Z2 instead
of Z1.