Remote IP Feature Phone Installation Manual
App. VI: Discovering the IP PBX’s remote-access IP address
M.1
Appendix VI:
Discovering the
remote-access IP address
for the remote IP PBX
Either the main office network administrator or the ISP can provide the public gateway address at the
main office. (This address is used by the Remote IP Feature Phone as the IP PBX’s remote-access IP
address.) However, in the event the network administrator and the ISP can’t be contacted, here is a
simple method for determining the remote-access IP address of the IP PBX.
To find the IP address of the gateway the phone will use as the remote-access IP address, you can run
the
TRACERT
command (for more information on using this command, see Appendix II) on one of the
PCs, on the main office network, that has access through the router. Normally, any
Windows
-equipped
PC with Internet and/or e-mail access will have this ability.
1.
Click on the
Start
button and select
Run
. The
Run
window will appear.
2.
Type
command
and click on
OK
. A DOS window will appear.
3.
Type
tracert -d www.arin.net
(where this refers to a Web site; use whichever one
you choose) and press
Enter
.
1
4.
After a few moment, the
TRACERT
command should return a display similar to that shown below.
The
first
public IP address in the list typically will be the internal, or gateway address of the main
office’s Internet router. The
second
address will be the
public IP address
of the main office router;
the Remote Phone will use this public IP address as the remote-access IP address.
C:\WINDOWS\tracert -d www.arin.net
Tracing route to www.arin.net [192.149.252.22]
over a maximum of 30 hops:
1 1 ms 1 ms 1 ms 10.0.2.1
2 3 ms 2 ms 2 ms 168.103.194.150
3 49 ms 46 ms 45 ms 168.103.198.254
4 47 ms 46 ms 46 ms 168.103.15.29
5 46 ms 46 ms 46 ms 205.171.25.89
6 47 ms 46 ms 46 ms 205.171.25.138
7 52 ms 51 ms 52 ms 205.171.5.169
8 71 ms 69 ms 70 ms 205.171.8.146
9 70 ms 71 ms 71 ms 205.171.21.150
10 69 ms 69 ms 69 ms 205.171.21.102
11 71 ms 71 ms 69 ms 205.171.4.250
12 72 ms 72 ms 71 ms 152.63.82.194
13 72 ms 72 ms 71 ms 152.63.81.14
14 85 ms 86 ms 86 ms 152.63.0.198
15 85 ms 88 ms 87 ms 152.63.34.37
16 86 ms 87 ms 88 ms 146.188.162.165
17 97 ms 96 ms 97 ms 157.130.35.6
18 91 ms 90 ms 92 ms 192.149.252.22
Trace complete.
1
The “-d” option keeps the
TRACERT
command from resolving host names; this speeds up the process.
This would be the IP PBX’s
remote-access IP address.
