2
ALL-FLEX
™
3 LEG ELECTRIC TABLE BASE
PARTS AND TOOLS
PLEASE REVIEW
these instructions before beginning the assembly procedures. Check that all the parts shown
below were provided with your order. Contact your supplier if any materials are missing. Do not discard the
your satisfaction.
ADDITIONAL TOOLS REQUIRED
•
• Power Driver
#2 Phillips drill bit
PARTS AND TOOLS PROVIDED
Leg Hinged to Frame (2)
Left
Left
Right
Right
Cross Channel (2)
Side Leg Top Support (2)
Control Unit Bracket (1)
Adjustable Feet (2)
Digital Keypad (1)
Control Unit (1)
Cable Clip (4)
Power Cable (1)
Center Leg (1)
Center Leg Top Support (2)
Fasteners
3mm
5mm
4mm
M5x18 (18)
M4x23 (2)
M6x15 (14)
M10x45 (8)
Allen Keys (1 each))
NOTE:
This install requires a power tool or
cordless drill. Except for the hex head
screws, which is
not
a hand tool install.
CAUTION:
Always check that screws used to
attach components to the work surface are
not too long for the thickness of the surface.
Work
Surface
