ESET LAN Update Server 2.7 страница 51 Скачать руководство пользователя

Страница: 51 / 84

Administration

Installation Guide

The file nod32installer.exe

The file nod32installer.exe is an installer that will prepare NOD32 for remote

install.

After executing, it is installed as a service. It will also perform the following

tasks:

Check whether NOD32 for Windows is already installed on

workstations. If yes, it will not attempt to install it again.
Run installation of NOD32 under an administrator account. All data

is sent from RAC, or the file nod32installer.exe receives them from

RAS.
Uninstall NOD32 from workstations.

Each new package created in the RAC has its own nod32installer.exe.

Internal information in this file is related to the package and RAS.

Address of RA in the files nod32installer.exe is usually defined during the

expert installation of the NOD32 Remote Administrator Server product. In

case this address was not specified, the file is given a default name – ie:

the name of the machine where RAS is being installed.

The file nod32installer.exe can be installed with the following parameters

(without slash “/”):

MODE =

defines whether it is installation of NOD32 for Windows (value: 1), or

uninstall (value: 0)

SERVER =

name or IP address of RAS, from which the NOD32 installation

package will be downloaded.

PORT =

port to which a request for sending NOD32 installation packages will

be sent.

Since nod32installer.exe runs in a totally silent mode, and no information

about problems with installation is displayed, the installer creates a log that

is saved in the file C:\nod32installer.log. It contains information about the

most important operations.

At the same time, nod32installer.exe creates a key, HKEY_LOCAL_

MACHINE\Software\Eset\NOD32 Remote Installer, in the Windows registry.

This will prevent repeated installation of the same package, if previous

installation was successful.

♦

►

Содержание LAN Update Server 2.7





















































































Результаты поиска

Содержание LAN Update Server 2.7

Отзывы:

Похожие инструкции для LAN Update Server 2.7

Бренды по названию

Популярные бренды

ESET LAN Update Server 2.7, Руководство по установке

Результаты поиска

Содержание LAN Update Server 2.7

Отзывы:

Похожие инструкции для LAN Update Server 2.7

Бренды по названию

Популярные бренды