ESET LAN Update Server 2.7, Руководство по установке

Страница: 21 / 84

Administration Installation Guide
1
The next item of note is
Remote Administration
. This is vital to
ensure the clients will connect to the RAS.
The Configuration Editor will,
by default, pick up the name of
the server where RAS has been
installed.
The default time for clients to
connect to RAS is 5 minutes, but
you can alter this if you wish. The
default port, that is opened on
the server for the workstations to
connect via, is 2222.
In the
License Keys
section, you can locate and add the license key
(nod32.lic) that you have purchased. This only allows your clients to see
when your license will expire for information purposes.
If you use MS Exchange Server, you will need a 2nd license key for XMON
which can also be added to this folder.
Now move further down the list to Update > Profile (My Profile) > Settings:
Update server address
In the Update section, again, the majority of the default settings should
prove satisfactory, however, there are a couple of absolutely vital settings
that you must enter in this section.
‘
Internet connection type ’ should be defined. In a network environment,
it’s highly likely that your company will connect to the internet via a Local
Area Network (LAN).
The ‘
Update server ’ must be specified so that your clients will know where
to look for their updates on the local server.
Using an HTTP connection is recommended and therefore you should
enter:
http://yourservername:8081 .
If you prefer to use a shared
folder, you should enter:
\\yourservername\sharename .