All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA-Automation or E-Service GmbH. Errors and technical modification subject to change.
ESERA-Automation, E-Service GmbH 2020
www.esera.de
11320 V1.0 R1.0 Manual
Page 6 of 8
11
Firmware Upgrade
The latest device software (firmware) can
be found in the download area of
Config Tool 3. When commissioning the
1-Wire controller, please check for new
firmware version. Please always use the
latest version.
You update the firmware via Config Tool 3.
Please refer to the operating instructions
for Config Tool 3, which can be found
within the Config Tool software under the
"HELP/SUPPORT" tab .
12
Example for the integration into IP-Symcon
On our website, we provide ESERA IP-Symcon software modules for easy integration of the 1-Wire controller into
IP-Symcon. This provides you with seamless integration into the software.
Details can be found on the ESERA website under "Compatible controllers / central units /
IP-
Symcon integration”.
https://www.esera.de/kompatible-steuerungen-zentralen/ip-symcon-integration/
13
Example for the integration in Loxone
Via the shop we provide an example project for the easy integration of the 1-Wire Controller into the Loxone
Miniserver. With it you extend the Miniserver with many 1-Wire functions.
Details can be found on the ESERA website under "Compatible Controllers / Central Units / Loxone Integration".
14
Example of integration in FHEM
For integration into the open source automation software FHEM we provide a software module for easy
integration of the 1-Wire controller. This provides you with a very powerful 1-Wire interface in FHEM.
Details can be found on the ESERA website under "Compatible Controllers / Central Units / FHEM Integration
”
https://www.esera.de/kompatible-steuerungen-zentralen/fhem-integration/
15
Example of Integration in KNX Automation
For integration into a KNX automation system, we offer a software module for the Gira Homeserver together with
the Grot company. This provides you with a very powerful 1-Wire integration for your KNX system. Details can be
found on the ESERA website under "Compatible controls / Control Centres / KNX Gira Homeserver
“.
https://www.esera.de/cat/index/sCategory/339
16
Your software not included?
The 1-Wire Controller 1 can be integrated extremely universally into many devices and software solutions due to
the text protocol used.
17
Operating conditions
The module may only be operated at the voltages and ambient conditions specified for it. The device can be
operated in any position. The device is intended for use in dry and dust-free rooms.
If condensation forms, wait at least 2 hours for the device to acclimatise.
The modules may only be put into operation under the supervision of a qualified electrician. Do not operate the
module in an environment where flammable gases, vapours or dust are present or could be present.
